The difference between air-cooled and water-cooled ice machines

1. The nature is different: the water-cooled radiator has a water inlet and a water outlet, and there are multiple water channels inside the radiatorChina Commercial Ice Machine Manufacturers. Air cooling is a kind of cooling method, which uses air as a medium to cool objects that need to be cooled.

2. Different characteristics: Air cooling is usually to increase the surface area of ​​the object that needs to be cooled, or to increase the rate of air flowing through the object per unit time. Water cooling is mainly composed of radiators, water pipes, water pumps, and sufficient water sources. This destined that most water cooling systems have a large "volume" and require sufficient space inside the case.

3. Different advantages: the heat dissipation effect of water cooling is much higher than that of air cooling system.
Precautions:

1. When the ambient temperature drops below 0°C, there is a possibility of freezing. Drainage operations must be carried out to drain the water, otherwise it may cause the water inlet pipe to rupture.

2. When the ice maker is not in use, it should be cleaned, and the ice mold and the moisture in the box should be blown dry with a hair dryer.

It should be stored in a dry and ventilated place without corrosive gas. Avoid storing in the open air.

3. The surrounding environment of the ice machine should be cleaned regularly, and no debris should be piled up to hinder heat dissipation.

4. The ice maker should be installed in a place far away from heat sources, without direct sunlight, and well-ventilated. The ambient temperature should not exceed 35°C to prevent excessively high ambient temperature from causing poor heat dissipation of the condenser and affecting the ice making effect. The ground on which the ice maker is installed should be firm and level, and the ice maker must be level,otherwise it will cause no ice removal and noise during operation. How to install and use the flake ice maker.